AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |
Back to Blog
Ki skin glue2/26/2024 If you let the glue cool, the paper will stick to the skis and rip when you try to peel. The trick with the iron method is to use a fair bit of heat and keep ironing until you see the glue soaking through the paper, then peel off the paper while it’s still really hot. This task isn’t nearly as iron-soiling as waxing, so you can get by with your clothes iron if your spouse isn’t looking but keep some toluene solvent handy in case. Option one is to iron on a porous material – the internet suggests brown paper – to absorb the glue melting from the iron’s heat. The iron method obviously requires an iron, which Wal-Mart will sell you for $10 and serves double duty as a ski waxing iron. There are two ways to remove the glue, both involving heat. Start by securing the skin in place, which can be done by placing it upside down on your skis (an unwanted board is better) and using some clamps/vice grips etc with rags as needed to avoid ski damage. For your first attempt you’ll want an entire evening. It’s a good DIY job for the unskilled but eager. Neither step is particularly hard, but can be messy, tedious and smelly. Re-gluing skins involves two steps: removing the old glue and applying the new. pine needles) and water absorption (dry them before storage). This can occur with skins that are heavily used, poorly treated or left in storage for too many decades like my vintage pair I recently scavenged from eBay. This degradation of the glue occurs because of contamination (i.e. Perhaps your climbing skins no longer stick or the glue has become goopy and leaves mementos on your skis.
0 Comments
Read More
Leave a Reply. |